Indezine Logo




Change a Diagonal Line to a Horizontal or Vertical Line in PowerPoint 2011 for Mac

Learn how to change a diagonal line to a horizontal or vertical line in PowerPoint 2011 for Mac. You'll have to change either the height or width value to zero.


Author:

Product/Version: PowerPoint 2011 for Mac

OS: Mac OS X





In PowerPoint you rotate shapes using the green rotation handle that appears when you select a shape. However, did you ever notice that the open line shape in PowerPoint doesn't show a green rotation handle? Look at Figure 1, where you can see a diagonal line on the left and a triangle shape on the right. Both are selected, yet notice that the triangle shape includes a green rotation handle whereas there is no such handle on the Line shape.

An open line shape doesn't have a rotation handle
Figure 1: An open line shape doesn't have a rotation handle

Now, if you want to rotate any diagonal line such as the one shown in Figure 1 above, how would you do that? Yes, you can right-click (or Ctrl + click) the line to bring up a contextual menu. Within this menu, select the Format Shape option to bring up the Format Shape dialog box as shown in Figure 2. Here you can find the Rotation option (highlighted in red within Figure 2), and type in a value.

Rotation option within the Format Shape dialog box
Figure 2: Rotation option within the Format Shape dialog box

But as you will notice, even a diagonal line has an initial Rotation value of 0°. So, you really have no clue at this time to determine how much you have to rotate to create a line that's standing vertically or sleeping horizontally! Even though you may think that you hit a dead end, there is a workaround using which you can rotate a Line shape using the Width and Height options that you see highlighted in blue within Figure 2, above. Read further to learn more.

Rotate a Line to make it Horizontal

  1. Select your diagonal line and access the Format tab of the Ribbon. Within the Format tab, locate the Width and Height options as shown highlighted in red within Figure 3.
  2. Height and Width options within the Format tab
    Figure 3: Height and Width options within the Format tab
  3. Alternatively, right-click (or Ctrl + click) the line to bring up a contextual menu. Within this menu select the Format Shape option to bring up the Format Shape dialog box as shown in Figure 2 (previously on this page). Click the Size option within the sidebar to access the same Height and Width options (highlighted in blue within Figure 2, previously on this page).
  4. With the line selected, change the Height value to zero, as shown highlighted in red within Figure 4. You will notice that this will turn the selected diagonal line on the slide into a horizontal line, as shown in Figure 4.
  5. Zero Height value turns the diagonal line into a horizontal line
    Figure 4: Zero Height value turns the diagonal line into a horizontal line
  6. Note: Remember that this option will actually reduce the length of your line. To counter this reduction of length, you should first calculate the length so that you can increase it thereafter. Learn more in our Finding Length of a Diagonal Line in PowerPoint 2011 for Mac tutorial.

Rotate a Line to make it Vertical

  1. Select your diagonal line and access the Width and Height options as explained in the preceding section on this page.
  2. With the line selected, change the Width value to zero (highlighted in red within Figure 5). You will notice that this will turn the selected diagonal line on the slide into a vertical line, as shown in Figure 5.
  3. Zero Width value turns the diagonal line into a vertical line 
    Figure 5: Zero Width value turns the diagonal line into a vertical line

Yes, now you have rotated your diagonal line. But have you noticed something? Is your line shape retaining its original length even after getting rotated? Unfortunately, it is not! Look at Figure 6 which shows a PowerPoint slide containing 3 Line shapes. The line marked as B is the copy of the same diagonal line that resulted from changing the Height to zero. And finally, the line marked as C is the copy of the same diagonal line A, that resulted from changing the Width to zero.

Diagonal line and its copies rotated horizontally and vertically
Figure 6: Diagonal line and its copies rotated horizontally and vertically

Look closely at Figure 6, and you will notice that both of the rotated lines have lost some length. None of them is of the same length as the original line A is. To overcome this drawback, you should know the length of your diagonal line in the first place. But again, there is no specific option in PowerPoint to achieve this! The good news is that we have a workaround for this too!

Find out the length of your diagonal line by following our Finding Length of a Diagonal Line in PowerPoint 2011 for Mac tutorial. Once you have noted down the length value, you can get back the original length of the rotated lines by following these guidelines:

  • Once your line is horizontal, select it, and change its Width value to match the length value you have noted down.
  • Once your line is vertical, select it, and change its Height value to match the length value you have noted down.

See Also:

Change a Diagonal Line to a Horizontal or Vertical Line in PowerPoint 2013 for Windows

You May Also Like: DesignEvo: Conversation with Henry Wong | Africa PowerPoint Templates


Popular Posts

Playing Video Across Slides in PowerPoint 2016 for Windows
Playing Video Across Slides in PowerPoint 2016 for Windows
Play a video clip across slides in PowerPoint 2016 for Windows.

Set Document Resolution in PowerPoint 2016 for Windows
Set Document Resolution in PowerPoint 2016 for Windows
Learn how to set document resolution in PowerPoint 2016 for Windows.

Creating Anchor Points for Connectors in PowerPoint 2010 for Windows
Creating Anchor Points for Connectors in PowerPoint 2010 for Windows
Learn how to create Anchor Points for connectors in PowerPoint 2010.

Working With Slide Numbers in PowerPoint 2016 for Windows
Working With Slide Numbers in PowerPoint 2016 for Windows
Learn how to add Slide Numbers on slides and Masters and more tricks on making them work to your will in PowerPoint 2016 for Windows.



Handmade Slides: Pushpins for PowerPoint

These “pushpin” graphics are already placed in PowerPoint slides. Just copy them and paste within your slides to create a look that makes a picture, shape, or anything else appear as if it has been pushed onto a surface, board, or wall with a pin! These ready-made pushpins are already within PowerPoint slides, and have been provided in five colors. Just copy them and paste them on your slides.

Download these Pushpins for just $19.99

This is the original page. An AMP (Accelerated Mobile Page) version of this page is also available for those on mobile platforms, at Change a Diagonal Line to a Horizontal or Vertical Line in PowerPoint 2011 for Mac.


Microsoft and the Office logo are trademarks or registered trademarks of Microsoft Corporation in the United States and/or other countries.

Home | PowerPoint | Photoshop | PowerPoint Templates | PowerPoint Tutorials | Blog | Notes | Ezine | Advertise | Feedback | Site Map | About Us | Contact Us

Link to Us | Privacy | Testimonials

PowerPoint Backgrounds | Christian PowerPoint Backgrounds | Business PowerPoint Presentation Templates

Plagiarism will be detected by Copyscape

©2000-2021, Geetesh Bajaj. All rights reserved.